202(Primer):

Product Description                                  

Single component waterborne Acrylic (modified ) paint for Steel

Performance Features

  Can be applied directly on rusty steel( rust layer thickness≤100 um)!

 It could turn rusty layer into a protection layer!

Single component

  Completely water-based, Eco-friendly

Quick drying  High coverage

Color and Appearance:   Milky white

Solid Content % :         35±3

Coating Thickness um:   ≤100 um(turn rusty layer into protection layer)

Density:                 0.85 g/cm3

VOC:                    <20g/L

Theoretical Coverage:   17 m²/L or 20 m²/ kg

Overcoating Interval:    Minimum: 48  hrs  MAX: unlimited

Recommended substrate conditions and temperature:

1. Remove all oil or grease, soluble contaminants and other foreign matter. All surfaces to be coated should be clean, dry and free from contamination.
2. If applied on the rusty surface, the rusty layer thickness should be below 100 um
3. Apply in good weather, don’t let coating contact any liquid like water or other solvent before completely dry. No painting be carried out in rainy day outdoor ,if the humidity is above 85%, please stop painting
4. The temperature of substrate should be above 5℃, lower temperature might not dry or cause a long time to dry

Air Spray:           Nozzle orifice: 1.5-2.5mm

Nozzle Pressure: 0.3-0.5MPa MP

Airless Spray       Nozzle orifice: 0.4-0.5mm

                    Nozzle Pressure: 12-15MPa

Brush :               Use soft bursh

Recommended Finish: RSL series finish

Shelf Life:            12 months

Overcoating Interval

Storage Temperature : 5-30℃ in well ventilated warehouse

Attention : This datasheet is made based on the lab test, it is believed to

be true and accurate. As workmanship, weather, construction equipment, quality of other materials and other variables affecting results are all beyond our control, Sunflower Speciality Co.,Ltd does not take any responsibility for the consequences caused by improper use of this product.